• devilish666@lemmy.world
    link
    fedilink
    arrow-up
    49
    ·
    10 months ago

    The only thing i want is DIY paper printer with open source driver + DIY ink cartridges.
    It’s kinda weird to me because i can find DIY 3d printer + it’s driver (open source) online, but no company made DIY paper printer with DIY cartridges until now
    Fuck HP, Epson, Canon, or whatever big company printers out there

    • Ook the Librarian@lemmy.world
      link
      fedilink
      arrow-up
      14
      ·
      10 months ago

      I have a Brother laser printer. (I love it, but that’s not important here.)

      The firmware doesn’t support duplexing A5 paper. I’m wondering if this is a good place to dip my toe into the world of open source driver development.

      • devilish666@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        10 months ago

        Well we don’t know if no one start to made it it
        I think it’s good if someone out there trying to make open source driver, imagine if we can add more features to our printers (like duplex A5 printing for your case) & especially if you can bypass HP printers that can broken printer if you used aftermarket ink

    • MystikIncarnate@lemmy.ca
      link
      fedilink
      English
      arrow-up
      9
      ·
      10 months ago

      If such a thing exists (DIY paper printers), I would like to know more, because the level of frustration I have with all the major printer mfrs I’ve used, is too damn high.

      Bonus points if it’s a laser printer, extra bonus points if the components for the printer can be 3D printed (with obvious exceptions).

      I just want a good, wired, network printer for everyday crap that I can use once in a blue moon for stupid documents that someone wants me to print, sign, scan and send back to them because they haven’t figured out how to do e-signatures yet… And the odd extra thing I need to print. Every time I print it seems like I need to reinstall the printer or update something to make it work. I buy laser printers so the ink doesn’t dry out before I can use it. The whole thing is so damned frustrating. Also, bluntly, unless you’re doing photo work, never buy an inkjet. They’re cheap, and there’s a reason they’re cheap. Inkjet has better color representation, so photo printers should probably be inkjet, for everything else, do yourself a favor and buy a laser printer. Toner lasts much, much, longer.

    • GTG3000@programming.dev
      link
      fedilink
      arrow-up
      9
      ·
      10 months ago

      The problem is the most important parts of inkjet/laser printers are pretty difficult to make by hand.

      You can DIY a plotter though. Probably could figure out a continuous supply of ink to the pen too?

      • devilish666@lemmy.world
        link
        fedilink
        arrow-up
        2
        arrow-down
        6
        ·
        10 months ago

        Well what’s different with 3d printer ?
        I think 3d printer it’s very complicated compared to paper printer because 3d printer can print objects in 3d (need to calibrated in x,y,z position just to make it right) but paper printer just 2d
        I think the right answer because no one want to make it because the business model of selling paper printer itself already at profit loss, printer company made profits from selling ink cartridges not from selling the printer itself

        • GTG3000@programming.dev
          link
          fedilink
          English
          arrow-up
          18
          ·
          edit-2
          10 months ago

          Resolution, generally.

          A laser printer operates by using UV light to make fine pigment powder stick to a drum by static electricity. True to it’s name, it used to be done via a laser that scanned the drum by reflecting off a rotating mirror - but nowadays it’s just as often a line of tiny UV LEDs. The pigment is than baked onto the paper by a small electric oven.

          The pulses of the laser and the pitch of those LEDs is generally way finer than what your run of the mill 3D printer is able to achieve reliably. And definitely finer than any nozzle you could put onto a 3D printer.

          Theoretically you could DIY the spinning mirror approach, but it would be difficult to source the optical parts, and calibrating it would be a gigantic pain in the ass. Not to mention that it would likely be significantly more expensive than an off-the-shelf laser printer.
          Also, guess what happens if you don’t have toner cartridge and print drum as one sealed unit. The printing medium is so fine it gets everywhere, ask anyone who ever tried reloading one of those cartridges.

          Square Singer explained the difference with InkJet above.

          Modern paper printers are deceptively advanced machines. They’d be pretty impressive if not for the greed of the manufacturers. High-precision parts made just right so that you could print out whatever annoying document your employer wants you to actually sign and bring in physically.

          A 3D printer is comparatively slow and generally prints in one colour. As I said, you can make a plotter easily by swapping out the print head for a pen, but then you have a single-colour printer that’s significantly slower than modern laser printers, that can be upgraded to have multiple colours with a toolchanger but won’t produce anything near the resolution of an inkjet (or even a laser printer, tbh).

          For reference, this is how a plotter at work looks like. Similar to bed slingers, ain’t it.

          I feel like theoretically it maybe could be possible to turn an SLA printer into a paper printer, with resin solidifying on a page? But then how would you keep the rest of the page from being smudged?

        • Square Singer@feddit.de
          link
          fedilink
          arrow-up
          10
          ·
          10 months ago

          What’s different? Basically the whole thing.

          A 3D printer (talking here about FDM because SLA really shares nothing at all with a 2D printer) is basically a tiny hot glue gun being moved on three axies by stepper motors. Of course, the temperature and extrusion controls are much more accurate than a hot glue gun, but that’s the basic principle. You got a single “printing point” that gets moved around and it only extrudes filament from that single point.

          An inkjet printer has one stepper motor that moves the paper and another that moves the print head from left to right. So there too are axies moved on stepper motors. A very simple trait also shared by e.g. CD and disk drives, slot machines, camera lenses and many other things. All these things are as close to a 2D printer as a 3D printer.

          The real magic of an inkjet printer is the print head. A print head doesn’t have a single nozzle but an array of many nozzles. This way, a printer cannot only print one dot at a time, but instead a few lines at a time. These nozzles are much tinier that the nozzles on a 3D printer, and they also are much more complicated to operate.

          A 3D printer just uses a stepper motor to push filament into the printhead, where it melts and is then pushed out of a hole.

          On an inkjet printer, you need to either rapidly boil the ink, so that a single vapor bubble appears that pushes just a tiny drop of ink on the paper, or you have a tiny piezoelectric transducer that creats a vibration that then pushes out ink.

          This is orders of magnitude more difficult than a 3D printer, and much tinier. You won’t be DIYing a working 2D printer from scratch, while that isn’t all that hard for a 3D printer. With access to a decent toolshop, you can make all relevant parts of a 3D printer. The same is not true for 2D printers.

          To rephrase your question: Why is it that so many people build DIY desktop PCs, but nobody is making a DIY flagship smartphone? What’s the difference?

          Basically everything.

          • devilish666@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            edit-2
            10 months ago

            TIL inkjet printer is very complicated compared to 3d printer
            I always think paper printer is very easy to make (well since so many paper printers out there compared to 3d printers)

            • Square Singer@feddit.de
              link
              fedilink
              arrow-up
              3
              ·
              10 months ago

              Yeah, that’s more due to need than due to technical difficulty.

              Even in 2024 it’s still common that you have to print out documents to sign them or tickets for some event or something like that. All these (quite relevant) use cases just don’t work if you don’t have a 2D printer.

              As much as I like my 3D printer, and as much as I recommend everyone to have one, is not nearly as necessary.

              In regards to how difficult they are to make, consider the price.

              2D printers have an advantage due to their much higher sales numbers (economy of scale) and they are subsidized by the manufacturer selling expensive ink. And still, a half-decent inkjet costs €100 or more, and a color laser easily costs €300 or more.

              3D printers usually have much lower sales numbers and people usually buy 3rd party filament, so the printer needs to be expensive enough to generate money for the manufacturer. And still you can get a decent Ender 3 for as low as €150.