Researchers at The Citizen Lab have for the first time released technical evidence of sophisticated mercenary spyware being distributed via online advertising.
Agreed. I used pihole initially when I was first learning networking, but when I got a dedicated machine and installed OPNsense, I learned how much easier so many things can be.
The downside is OPNsense is it’s information light, and a bit inscrutable lol I’m having an issue with my WAN dhcp going offline, seems to be happening on a cadence. My modem is fine, connection is valid. Rebooting the OPNsense box fixes it. Losing my mind a bit but I’ll figure it out 🙃
By default FreeBSD sets a 20 minute ARP maximum age while many ONT’s set a 9 minute maximum age. This will show up as performance issues initially then cause other issues.
Also Realtek NIC’s are notorious for issues with FreeBSD, so if you are using one replacing it with an Intel one is highly recommended.
I believe it was the realtek NIC and some settings offloading to the hardware I set during troubleshooting. Installed the Realtek driver in the plugins and changed those settings and so far no instability! Thank you for the tunable suggestion though I will also be checking that out!
Be sure to set a cron job for updating the DNS Blocklists, running zcrubs, smart tests, and trim if you are using a ssd.
I am working on a way to do snapshots for the system as well for super simple restores that are automatically created. Before an update you WILL want to have a snapshot available. Once snapshots are automated I will probably start doing automatic updates. It basically creates a system similar to how an immutable OS works, if something goofs you can simply roll back to a previous working state and pause updates. I previously had a script I setup via a cron job but the system removed the job during an update.
Just moved to an OPNsense network. Setting up unbound was so nice and simple. Much preferred over pihole.
Agreed. I used pihole initially when I was first learning networking, but when I got a dedicated machine and installed OPNsense, I learned how much easier so many things can be.
The downside is OPNsense is it’s information light, and a bit inscrutable lol I’m having an issue with my WAN dhcp going offline, seems to be happening on a cadence. My modem is fine, connection is valid. Rebooting the OPNsense box fixes it. Losing my mind a bit but I’ll figure it out 🙃
Try setting a tunable of:
net.link.ether.inet.max_age = 540
By default FreeBSD sets a 20 minute ARP maximum age while many ONT’s set a 9 minute maximum age. This will show up as performance issues initially then cause other issues.
Also Realtek NIC’s are notorious for issues with FreeBSD, so if you are using one replacing it with an Intel one is highly recommended.
I believe it was the realtek NIC and some settings offloading to the hardware I set during troubleshooting. Installed the Realtek driver in the plugins and changed those settings and so far no instability! Thank you for the tunable suggestion though I will also be checking that out!
No problem.
Be sure to set a cron job for updating the DNS Blocklists, running zcrubs, smart tests, and trim if you are using a ssd.
I am working on a way to do snapshots for the system as well for super simple restores that are automatically created. Before an update you WILL want to have a snapshot available. Once snapshots are automated I will probably start doing automatic updates. It basically creates a system similar to how an immutable OS works, if something goofs you can simply roll back to a previous working state and pause updates. I previously had a script I setup via a cron job but the system removed the job during an update.