Blaster M

Microsoft Flight Simulator: A whole airplane on the couch

It does, as DDR5 comes with rudimentary ECC protection builtin.

My problem is this is an AM4 system using DDR4 memory… already outdated.

last access time

If you’re running it thru the FUSE driver perhaps…proprietary ntfs drivers absolutely rip

Also make sure last access time is turned off, that is a nice auditing feature for opsec, but it slows things down for the normal user. It should be off by default above 256GB drive sizes.

Interesting to see how many features NTFS does support

I hope he’s gone and cut the telemetry from this car… if not, I’d say poser.

The reason I still don’t daily Linux (that and wireless VR streaming doesn’t)

DHCP, when set up properly, makes for less work. Reservations will have the DHCP server hand out the same IP to the same hardware (MAC address) when it asks. If you have a device that is from the dinosaur age that doesn’t play nice with DHCP, then make sure you give it an address that is outside the DHCP range on the same subnet. ex: Some home routers use 192.168.1.100 to 192.168.1.200 as the dhcp range. Setting anything from 192.168.1.1 (or 2 if the router is on 1) to 192.168.1.99 is fine, as is 192.168.1.201-192.168.1.254 (or 253 if the router is on 254). However, by setting static ips, you have to remember those ips specifically to interconnect devices on the lan, whereas reserving via dhcp allows you to use local dns resolution to connect to devices via their hostname instead. In additon, you run the risk of ip conflicts from forgetting which device has what ip in an increasingly complex system, and if you change internet providers or routers, you have a lot of extra work to do to fix the network settings to get those static ips to connect.

Alternately, just use the link-local ipv6 address to interconnect on the lan. That doesn’t change on most devices, as it is based on the MAC address, and is always reachable on the lan.

I understood that reference!

Everyone on Lemmy: “Just use Arch! Why are you using anything but Arch! Arch is the best! Arch is better than everything else!”

Also Lemmy users: ∆

Me: So my Ubuntu Server, which has been the same install for well over 10 years, hasn’t needed a reinstall ever… even through corrupted RAM, multiple hardware changes, and drive upgrades, I’ve just cloned it and kept on trucking…

…and yet everyone says Ubuntu is the worst…

Here’s the deal. If your server is close to using up all its RAM, then yes, more RAM better.

However, if your server is close to being full on storage, you need to address that with a bigger storage drive.

UniGet GUI

The factory must grow

Alternately, OPNsense (free) on a cheap computer with two or more ethernet ports can do this. Unlike OpenWRT, it is much easier to update.

The reason I have been switching my systems over to Fedore KDE is because of Wayland

I was fine with LXDE… until it got abandoned for LXQt… which is alright, but it’s more “kit car hackjobby” in its presentation than LXDE.

How? Nothing I’ve tried makes it work.

I have one better. Regardless of which port and which monitor, physically, logically, sddm always inverts the position of my dual monitors versus everything else.

Fedora 40 KDE, Wayland